ceremonyclient/docker/README.md
Cassandra Heart 13bac91367
v1.4.18-patch-1 (#216)
* experiment: verify in channel (#215)

* Change volume mapping so .config folder is created inside node folder and not on root (#214)

* Update main.go to fix Q logo (#213)

Q logo is not appearing correctly on the terminal while running node. Added a new line character after "Signature check passed" to fix it

* switched get node info response to use masterClock frame for maxFrame field (#212)

* fix: keys file remains null (#217)

* Revert "Change volume mapping so .config folder is created inside node folder…" (#218)

This reverts commit 27f50a92c6f5e340fd4106da828c6e8cdc12116b.

* Docker split take 2 (#219)

* split runtime docker files into a docker subfolder

* split DOCKER-README.md

* updated docker instructions

* add restore command

* add image update related tasks

* add command to test if P2P port is visible

* Remove bootstrap peer (#189)

* Change bootstrap servers to DHT-only peers (#187)

* support voucher file-based claims (#183)

* Change bootstrap servers to DHT-only peers

Changing my bootstrap servers to DHT-only peers with somewhat lower
specs. One of the new ones is in the US and the other one is in
Switzerland. Both use reliable providers and have 10Gbps network
interfaces.

---------

Co-authored-by: Cassandra Heart <7929478+CassOnMars@users.noreply.github.com>

* Don't run self-test in DHT-only mode (#186)

* support voucher file-based claims (#183)

* Don't run self-test in DHT-only mode

The node tries to create a self-test when ran with the `-dht-only`
flag, but it doesn't load the KZG ceremony data in DHT-only mode
which leads to a crash.

Don't run self-test when the `-dht-only` flag is set.

I tested by starting a node locally with and without existing
self-test and with the `-dht-only` flag.

---------

Co-authored-by: Cassandra Heart <7929478+CassOnMars@users.noreply.github.com>

* Embed json files in binary (#182)

* Embed ceremony.json in binary

* Embed retroactive_peers.json in binary

* Signers build and verification tasks (#181)

* add signers specific Taskfile

* add verify tasks

* move signer task under signer folder

* create docker image specific for signers

* map current user into docker image and container

* ignore node-tmp-*

* add verify:build:internal

* prevent tasks with docker commands from being run inside a container

* rename *:internal to *:container

* add README.md

* add pem files to git

* Updating Q Guide link (#173)

* Update README.md

Updated link to Quilibrium guide to new website

* Update README.md

---------

Co-authored-by: littleblackcloud <163544315+littleblackcloud@users.noreply.github.com>
Co-authored-by: Agost Biro <5764438+agostbiro@users.noreply.github.com>
Co-authored-by: Cassandra Heart <7929478+CassOnMars@users.noreply.github.com>
Co-authored-by: Demipoet <161999657+demipoet@users.noreply.github.com>

* Signer related fixes (#220)

* add pems 16 and 17

* remove .bin extension from generated binaries

* no more json files to copy to docker image

* feat: recalibrate self-test on the fly (#221)

* fix: switch RPC for peer and node info (#222)

* replace binaries with patch build

* add digests

* Signatory #13 added

* Signatory #4 added (#223)

* Signatory #14 added

* Signatory #17 added

* Signatory #12 added

* Signatory #3 added

* Signatory #2 added

* Signatory #16 added

* Signatory #1 added

* Signatory #8 added

* remove binaries, release ready

---------

Co-authored-by: AvAcalho <158583728+AvAcalho@users.noreply.github.com>
Co-authored-by: Ravish Ahmad <ravishahmad16@gmail.com>
Co-authored-by: luk <luk@luktech.dev>
Co-authored-by: Marius Scurtescu <marius.scurtescu@gmail.com>
Co-authored-by: littleblackcloud <163544315+littleblackcloud@users.noreply.github.com>
Co-authored-by: Agost Biro <5764438+agostbiro@users.noreply.github.com>
Co-authored-by: Demipoet <161999657+demipoet@users.noreply.github.com>
Co-authored-by: 0xOzgur <29779769+0xOzgur@users.noreply.github.com>
2024-05-27 00:10:15 -05:00

166 lines
5.0 KiB
Markdown

# Quilibrium Docker Instructions
## Install Docker on a Server
> [!IMPORTANT]
> You have to install Docker Engine on your server, you don't want to install Docker Desktop.
The official Linux installation instructions start here:
https://docs.docker.com/engine/install/
For Ubuntu you can start here:
https://docs.docker.com/engine/install/ubuntu/
While there are several installation methods, you really want to use the apt repository, this way you get
automatic updates.
Make sure you also follow the Linux post-installation steps:
https://docs.docker.com/engine/install/linux-postinstall/
## Install Docker on a Desktop
For a Linux desktop follow the server installation steps above, do not install Docker Desktop for Linux unless
you know what you are doing.
For Mac and Windows follow the corresponding Docker Desktop installation links from the top of:
https://docs.docker.com/engine/install/
## Running a Node
Copy [docker-compose.yml](docker-compose.yml) to a new folder on a server. The official
Docker image provided by Quilibrium Network will be pulled.
A `.config/` subfolder will be created in this folder, this will hold both configuration
and the node storage.
Optionally you can also copy [Taskfile.yaml](Taskfile.yaml) and [.env.example](.env.example) to the
server, if you are planning to use them. See below.
### New Instance
If you are starting a brand new node then simply run Quilibrium in a container with:
```shell
docker compose up -d
```
A `.config/` subfolder will be created under the current folder, this is mapped inside the container.
> [!IMPORTANT]
> Once the node is running (the `-node-info` command shows a balance) make sure you backup
> `config.yml` and `keys.yml`.
### Restore Previous Instance
If you have both `config.yml` and `keys.yml` backed up from a previous instance then follow these
steps to restore them:
1. Create an empty `.config/` subfolder.
2. Copy `config.yml` and `keys.yml` to `.config/`.
3. Start the node with:
```shell
docker compose up -d
```
### Task
You can also use the [Task](https://taskfile.dev/) tool, it is a simple build tool that takes care of running
complex commands and intereacting with the container. The tasks are all defined in
[Taskfile.yaml](Taskfile.yaml).
You can optionally create an `.env` file, in the same folder to override specific parameters. Right now
only one optional env var is supported with `Task` and that is `QUILIBRIUM_IMAGE_NAME`, if you want to change the
default image name from `quilibrium` to something else. If you are pushing your images to GitHub, for example, then you
have to follow the GitHub naming convention and use a name like `ghcr.io/mscurtescu/ceremonyclient`. See the
[.env.example](.env.example) sample file, and keep in mind that `.env` is shared with
[docker-compose.yml](docker-compose.yml).
Bellow there are example interactions with `Task`.
Start the container through docker compose:
```shell
task up
```
Show the logs through docker compose:
```shell
task logs
```
Drop into a shell inside the running container:
```shell
task shell
```
Stop the running container(s):
```shell
task down
```
Backup the critical configuration:
```shell
task backup
```
The above command will create a `backup.tar.gz` archive in the current folder, you still have to copy this
file from the server into a safe location. The command adds the `config.yml` and `keys.yml` files from
the `.config/` subfolder to the archive, with the ownership of the current user.
## Customizing docker-compose.yml
If you want to change certain parameters in [docker-compose.yml](docker-compose.yml) it is better not
to edit the file directly as new versions pushed through git would overwrite your changes. A more
flexible solution is to create another file called `docker-compose.override.yml` right next to it
and specifying the necessary overriding changes there.
For example:
```yaml
services:
node:
image: ghcr.io/mscurtescu/ceremonyclient
restart: on-failure:7
```
The above will override the image name and also the restart policy.
You can optionally create an `.env` file, in the same folder to override specific parameters. See the
[.env.example](.env.example) sample file, and keep in mind that `.env` is shared with
[Taskfile.yaml](Taskfile.yaml). You can customize the image name and port mappings.
To check if your overrides are being picked up run the following command:
```shell
docker compose config
```
This will output the merged and canonical compose file that will be used to run the container(s).
## Interact with a running container
Drop into a shell inside a running container:
```shell
docker compose exec -it node sh
```
Watch the logs:
```shell
docker compose logs -f
```
Get the node related info (peer id, version, max frame and balance):
```shell
docker compose exec node node -node-info
```
Run the DB console:
```shell
docker compose exec node node -db-console
```
Run the Quilibrium client:
```shell
docker compose exec node qclient help
docker compose exec node qclient token help
docker compose exec node qclient token balance
```