smeb_y/ceremonyclient
1
0
Fork 0
mirror of https://source.quilibrium.com/quilibrium/ceremonyclient.git synced 2024-11-10 18:25:17 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
52a197368e
ceremonyclient/pebble/testdata/level_checker
Cassandra Heart 2e2a1e4789
v1.2.0 (#31)
2024-01-03 01:31:42 -06:00

359 lines
8.0 KiB
Plaintext
Raw Blame History

# Format for define command:
# Levels are ordered from higher to lower, and each new level starts with an L
# Each level is defined using an even number of lines where every pair of lines represents
# a file. The files within a level are ordered from smaller to larger keys.
# Each file is defined using: the first line specifies the smallest and largest internal
# keys and the second line the point key-value pairs in the sstable in order. The rangedel
# key-value pairs should also be in increasing order relative to the other rangedel pairs.
# The largest file key can take the form of <userkey>.RANGEDEL.72057594037927935, which
# represents the range deletion sentinel.
#
# Many of the correct case definitions are borrowed from merging_iter since it defines
# some tricky configurations.
# The untruncated range tombstone at the higher level does not overlap with the lower level once
# we consider the file boundaries, which is why its lower sequence number is ok.
define
L
a.SET.30 e.RANGEDEL.72057594037927935
a.SET.30:30 c.SET.27:27 a.RANGEDEL.8:f
L
e.SET.10 g.SET.20
e.SET.10:10 g.SET.20:20 e.RANGEDEL.8:f
----
Level 1
file 0: [a#30,1-e#72057594037927935,15]
Level 2
file 0: [e#10,1-g#20,1]
check
----
# The untruncated range tombstone at the higher level does not overlap with the g point at the
# lower level once we consider the file boundaries, which is why its lower sequence number is ok.
define
L
a.SET.15 f.SET.16
a.SET.15:15 c.SET.13:13 f.SET.16:16 a.RANGEDEL.12:h
L
e.SET.10 g.SET.15
e.SET.10:10 g.SET.15:15
----
Level 1
file 0: [a#15,1-f#16,1]
Level 2
file 0: [e#10,1-g#15,1]
check
----
# The untruncated range tombstones in both levels do not overlap once we consider the file
# boundaries (which are non-overlapping).
define
L
c.SET.30 f.RANGEDEL.0
c.SET.30:30 d.SET.27:27 a.RANGEDEL.8:f
L
a.SET.10 c.RANGEDEL.72057594037927935
a.SET.10:10 b.SET.12:12 a.RANGEDEL.8:f
----
Level 1
file 0: [c#30,1-f#0,15]
Level 2
file 0: [a#10,1-c#72057594037927935,15]
check
----
# The range tombstone in the higher level does not overlap with the b point in the lower level,
# which has a higher sequence number, when we consider the file boundaries.
define
L
c.SET.15 g.SET.16
c.SET.15:15 f.SET.13:13 g.SET.16:16 a.RANGEDEL.12:h
L
b.SET.14 d.SET.10
b.SET.14:14 d.SET.10:10
----
Level 1
file 0: [c#15,1-g#16,1]
Level 2
file 0: [b#14,1-d#10,1]
check
----
# The two files do not overlap despite the seeming overlap of the range tombstones.
define
L
a.SET.30 e.RANGEDEL.72057594037927935
a.SET.30:30 c.SET.27:27 a.RANGEDEL.8:g
L
e.SET.10 g.SET.20
e.SET.10:10 g.SET.20:20 e.RANGEDEL.8:g
----
Level 1
file 0: [a#30,1-e#72057594037927935,15]
Level 2
file 0: [e#10,1-g#20,1]
check
----
define
L
a.SET.30 e.RANGEDEL.72057594037927935
a.SET.30:30 c.SET.27:27 a.RANGEDEL.8:g
L
a.SET.10 g.SET.20
a.SET.10:10 c.SET.28:28 g.SET.20:20
----
Level 1
file 0: [a#30,1-e#72057594037927935,15]
Level 2
file 0: [a#10,1-g#20,1]
check
----
found InternalKey c#27,SET in L1: fileNum=000010 and InternalKey c#28,SET in L2: fileNum=000011
# The sentinel key for the RANGEDEL should not violate g having a higher seq num at a
# lower level.
define
L
a.SET.30 g.RANGEDEL.72057594037927935
a.SET.30:30 c.SET.27:27 a.RANGEDEL.8:g
L
g.SET.10 j.SET.20
g.SET.10:10 j.SET.20:20
----
Level 1
file 0: [a#30,1-g#72057594037927935,15]
Level 2
file 0: [g#10,1-j#20,1]
check
----
define
L
a.SET.30 g.SET.8
a.SET.30:30 c.SET.27:27 a.RANGEDEL.8:g g.SET.8:8
L
g.SET.10 j.SET.20
g.SET.10:10 j.SET.20:20
----
Level 1
file 0: [a#30,1-g#8,1]
Level 2
file 0: [g#10,1-j#20,1]
check
----
found InternalKey g#8,SET in L1: fileNum=000014 and InternalKey g#10,SET in L2: fileNum=000015
define
L
a.SET.30 g.SET.30
a.SET.30:30 c.SET.8:8 g.SET.30:30
L
a.SET.10 j.SET.20
a.SET.10:10 j.SET.20:20 b.RANGEDEL.10:g
----
Level 1
file 0: [a#30,1-g#30,1]
Level 2
file 0: [a#10,1-j#20,1]
check
----
tombstone b-g:{(#10,RANGEDEL)} in L2: fileNum=000017 deletes key c#8,SET in L1: fileNum=000016
define
L
a.RANGEDEL.8 c.RANGEDEL.72057594037927935
a.RANGEDEL.8:c
L
a.RANGEDEL.6 d.RANGEDEL.72057594037927935
a.RANGEDEL.6:d b.RANGEDEL.10:c
----
Level 1
file 0: [a#8,15-c#72057594037927935,15]
Level 2
file 0: [a#6,15-d#72057594037927935,15]
check
----
encountered tombstone b-c:{(#8,RANGEDEL)} in L1: fileNum=000018 that has a lower seqnum than the same tombstone in L2: fileNum=000019
# Check incorrect ordering of point keys in an sstable.
define disable-key-order-checks
L
a.SET.3 e.SET.4
e.SET.4:e a.SET.3:a
L
d.SET.1 f.SET.2
d.SET.1:d f.SET.2:f
----
Level 1
file 0: [a#3,1-e#4,1]
Level 2
file 0: [d#1,1-f#2,1]
check
----
out of order keys e#4,SET >= a#3,SET in L1: fileNum=000020
# Check successive sstables on a level are ordered.
define disable-key-order-checks
L
a.SET.1 b.SET.2
a.SET.1:a b.SET.2:b
b.SET.3 c.SET.4
b.SET.3:b c.SET.4:c
----
Level 1
file 0: [a#1,1-b#2,1]
file 1: [b#3,1-c#4,1]
check
----
out of order keys b#2,SET >= b#3,SET in L1: fileNum=000023
# Check range delete keys are fragmented and ordered in an sstable having
# rangeDelV2 formatted range delete blocks.
# Case 1: Fragmented but not ordered.
define write-unfragmented disable-key-order-checks
L
a.RANGEDEL.1 g.RANGEDEL.72057594037927935
d.RANGEDEL.2:e d.RANGEDEL.1:e f.RANGEDEL.3:g a.RANGEDEL.4:b
----
Level 1
file 0: [a#1,15-g#72057594037927935,15]
check
----
unordered or unfragmented range delete tombstones f-g:{(#3,RANGEDEL)}, a-b:{(#4,RANGEDEL)} in L1: fileNum=000024
# Case 2: Ordered but not fragmented.
define write-unfragmented disable-key-order-checks
L
a.RANGEDEL.1 d.RANGEDEL.72057594037927935
a.RANGEDEL.1:d b.RANGEDEL.2:c
----
Level 1
file 0: [a#1,15-d#72057594037927935,15]
check
----
unordered or unfragmented range delete tombstones a-d:{(#1,RANGEDEL)}, b-c:{(#2,RANGEDEL)} in L1: fileNum=000025
# Case 3: Verify check is done before truncation.
define write-unfragmented disable-key-order-checks
L
a.RANGEDEL.1 b.RANGEDEL.72057594037927935
a.RANGEDEL.1:z d.RANGEDEL.2:e
----
Level 1
file 0: [a#1,15-b#72057594037927935,15]
check
----
unordered or unfragmented range delete tombstones a-z:{(#1,RANGEDEL)}, d-e:{(#2,RANGEDEL)} in L1: fileNum=000026
# Merge record processing.
# Case 1: Latest versions of a key are MERGE records and processing one of
# them fails.
define
L
a.MERGE.10 a.MERGE.9
a.MERGE.10:10 a.MERGE.9:fail-merge
----
Level 1
file 0: [a#10,2-a#9,2]
check merger=fail-merger
----
merge processing error on key a#9,MERGE in L1: fileNum=000027: merge failed
# Case 2: Last checked key is a MERGE record.
define
L
a.MERGE.10 a.MERGE.9
a.MERGE.10:10 a.MERGE.9:fail-finish
----
Level 1
file 0: [a#10,2-a#9,2]
check merger=fail-merger
----
merge processing error on key a#9,MERGE in L1: fileNum=000028: finish failed
# Case 3: MERGE records succeeded by newer versions of a key are also
# processed.
define
L
a.MERGE.10 a.SINGLEDEL.3
a.MERGE.10:10 a.MERGE.9:9 a.SET.8:8 a.MERGE.7:7 a.MERGE.6:6 a.DEL.5: a.MERGE.4:fail-finish a.SINGLEDEL.3:
----
Level 1
file 0: [a#10,2-a#3,7]
check merger=fail-merger
----
merge processing error on key a#3,SINGLEDEL in L1: fileNum=000029: finish failed
# Case 4: Finish processing on key change.
define
L
a.MERGE.10 b.SET.11
a.MERGE.10:10 a.MERGE.9:fail-finish b.SET.11:11
----
Level 1
file 0: [a#10,2-b#11,1]
check merger=fail-merger
----
merge processing error on key b#11,SET in L1: fileNum=000030: finish failed
# Case 5: SET finishes MERGE record processing.
define
L
a.MERGE.10 a.SET.9
a.MERGE.10:10 a.SET.9:fail-finish
----
Level 1
file 0: [a#10,2-a#9,1]
check merger=fail-merger
----
merge processing error on key a#9,SET in L1: fileNum=000031: finish failed
# Case 6: DEL finishes MERGE record processing.
define
L
a.MERGE.10 a.DEL.9
a.MERGE.10:fail-finish a.DEL.9:
----
Level 1
file 0: [a#10,2-a#9,0]
check merger=fail-merger
----
merge processing error on key a#9,DEL in L1: fileNum=000032: finish failed
# Case 7: SINGLEDEL finishes MERGE record processing.
define
L
a.MERGE.10 a.SINGLEDEL.9
a.MERGE.10:fail-finish a.SINGLEDEL.9:
----
Level 1
file 0: [a#10,2-a#9,7]
check merger=fail-merger
----
merge processing error on key a#9,SINGLEDEL in L1: fileNum=000033: finish failed
Reference in New Issue View Git Blame Copy Permalink