ceremonyclient/pebble/testdata/merging_iter
Cassandra Heart 2e2a1e4789
v1.2.0 (#31)
2024-01-03 01:31:42 -06:00

593 lines
10 KiB
Plaintext

# Format for define command:
# Levels are ordered from higher to lower, and each new level starts with an L
# Each level is defined using an even number of lines where every pair of lines represents
# a file. The files within a level are ordered from smaller to larger keys.
# Each file is defined using: the first line specifies the smallest and largest internal
# keys and the second line the point key-value pairs in the sstable in order. The rangedel
# key-value pairs should also be in increasing order relative to the other rangedel pairs.
# The largest file key can take the form of <userkey>.RANGEDEL.72057594037927935, which
# represents the range deletion sentinel.
# The rangedel should not delete any points in any sstable. The two files were involved in a
# compaction and then the second file got moved to a lower level.
define
L
a.SET.30 e.RANGEDEL.72057594037927935
a.SET.30:30 c.SET.27:27 a.RANGEDEL.8:f
L
e.SET.10 g.SET.20
e.SET.10:10 g.SET.20:20 e.RANGEDEL.8:f
----
1:
000000:[a#30,SET-e#inf,RANGEDEL]
2:
000001:[e#10,SET-g#20,SET]
# isNextEntryDeleted() should not allow the rangedel to act on the points in the lower sstable
# that are after it.
iter
first
next
next
next
next
stats
reset-stats
stats
----
a#30,1:30
c#27,1:27
e#10,1:10
g#20,1:20
.
{BlockBytes:116 BlockBytesInCache:0 BlockReadDuration:0s KeyBytes:5 ValueBytes:8 PointCount:5 PointsCoveredByRangeTombstones:0 SeparatedPointValue:{Count:0 ValueBytes:0 ValueBytesFetched:0}}
{BlockBytes:0 BlockBytesInCache:0 BlockReadDuration:0s KeyBytes:0 ValueBytes:0 PointCount:0 PointsCoveredByRangeTombstones:0 SeparatedPointValue:{Count:0 ValueBytes:0 ValueBytesFetched:0}}
# seekGE() should not allow the rangedel to act on points in the lower sstable that are after it.
iter
seek-ge d
next
next
----
e#10,1:10
g#20,1:20
.
# isPrevEntryDeleted() should not allow the rangedel to act on the points in the lower sstable
# that are after it.
iter
last
prev
prev
prev
----
g#20,1:20
e#10,1:10
c#27,1:27
a#30,1:30
# seekLT() should not allow the rangedel to act on points in the lower sstable that are after it.
iter
seek-lt h
prev
prev
prev
----
g#20,1:20
e#10,1:10
c#27,1:27
a#30,1:30
# We keep the rangedel alive by having a point in the higher level past the first point in the
# lower level. This rangedel hides that first point in the lower level but we should not seek to
# h and hide the second point.
define
L
a.SET.15 f.SET.16
a.SET.15:15 c.SET.13:13 f.SET.16:16 a.RANGEDEL.12:h
L
e.SET.10 g.SET.15
e.SET.10:10 g.SET.15:15
----
1:
000002:[a#15,SET-f#16,SET]
2:
000003:[e#10,SET-g#15,SET]
iter
first
next
next
next
----
a#15,1:15
c#13,1:13
f#16,1:16
g#15,1:15
iter
seek-ge d
next
----
f#16,1:16
g#15,1:15
iter
last
prev
prev
prev
----
g#15,1:15
f#16,1:16
c#13,1:13
a#15,1:15
# The rangedel should not delete any points in any sstable. The two files were involved in an
# compaction and then the first file got moved to a lower level.
define
L
c.SET.30 f.RANGEDEL.0
c.SET.30:30 d.SET.27:27 a.RANGEDEL.8:f
L
a.SET.10 c.RANGEDEL.72057594037927935
a.SET.10:10 b.SET.12:12 a.RANGEDEL.8:f
----
1:
000004:[c#30,SET-f#0,RANGEDEL]
2:
000005:[a#10,SET-c#inf,RANGEDEL]
# isNextEntryDeleted() should not allow the rangedel to act on the points in the lower sstable
# that are before it.
iter
first
next
next
next
----
a#10,1:10
b#12,1:12
c#30,1:30
d#27,1:27
# seekGE() should not allow the rangedel to act on points in the lower sstable that are before it.
iter
seek-ge a
next
next
next
----
a#10,1:10
b#12,1:12
c#30,1:30
d#27,1:27
# isPrevEntryDeleted() should not allow the rangedel to act on the points in the lower sstable
# that are before it.
iter
last
prev
prev
prev
----
d#27,1:27
c#30,1:30
b#12,1:12
a#10,1:10
# seekLT() should not allow the rangedel to act on points in the lower sstable that are before it.
iter
seek-lt e
prev
prev
prev
----
d#27,1:27
c#30,1:30
b#12,1:12
a#10,1:10
# We keep the rangedel alive in prev iteration by having a point in the higher level before
# the last point in the lower level. This rangedel hides that first point in the lower level
# but we should not seek to a and hide the second point.
define
L
c.SET.15 g.SET.16
c.SET.15:15 f.SET.13:13 g.SET.16:16 a.RANGEDEL.12:h
L
b.SET.14 d.SET.10
b.SET.14:14 d.SET.10:10
----
1:
000006:[c#15,SET-g#16,SET]
2:
000007:[b#14,SET-d#10,SET]
iter
last
prev
prev
prev
----
g#16,1:16
f#13,1:13
c#15,1:15
b#14,1:14
iter
seek-lt f
prev
----
c#15,1:15
b#14,1:14
# The rangedel should not delete anything.
define
L
a.SET.30 e.RANGEDEL.72057594037927935
a.SET.30:30 c.SET.27:27 a.RANGEDEL.8:g
L
e.SET.10 g.SET.20
e.SET.10:10 g.SET.20:20 e.RANGEDEL.8:g
----
1:
000008:[a#30,SET-e#inf,RANGEDEL]
2:
000009:[e#10,SET-g#20,SET]
# When doing seek-lt f, the rangedel should not apply to e in the lower sstable. This is the
# reason we cannot just use largest user key to constrain the rangedel and we need to
# know whether it is the sentinel key.
iter
seek-lt f
prev
prev
----
e#10,1:10
c#27,1:27
a#30,1:30
iter
seek-ge e
next
----
e#10,1:10
g#20,1:20
iter
first
seek-ge e
next
----
a#30,1:30
e#10,1:10
g#20,1:20
iter
first
next
next
next
next
----
a#30,1:30
c#27,1:27
e#10,1:10
g#20,1:20
.
# Verify that switching directions respects lower/upper bound.
define
L
a.SET.9 d.SET.6
a.SET.9:9 b.SET.8:8 c.SET.7:7 d.SET.6:6
----
1:
000010:[a#9,SET-d#6,SET]
# Verify the lower bound is respected in switchToMinHeap() when the
# heap is empty.
iter
set-bounds lower=c
seek-ge c
prev
prev
next
----
c#7,1:7
.
.
c#7,1:7
# Verify the upper bound is respected in switchToMaxHeap() when the
# heap is empty.
iter
set-bounds upper=c
seek-lt c
next
next
prev
----
b#8,1:8
.
.
b#8,1:8
# Verify the lower bound is respected in switchToMinHeap() when the
# heap is not empty.
define
L
a.SET.9 d.SET.6
a.SET.9:9 b.SET.8:8 c.SET.7:7 d.SET.6:6
L
c.SET.5 f.SET.2
c.SET.5:5 d.SET.4:4 e.SET.3:3 f.SET.2:2
----
1:
000011:[a#9,SET-d#6,SET]
2:
000012:[c#5,SET-f#2,SET]
iter
set-bounds lower=d
seek-ge d
prev
prev
next
next
----
d#6,1:6
.
.
d#6,1:6
d#4,1:4
# Check the behavior of reverse prefix iteration.
iter
seek-prefix-ge d
prev
next
----
d#6,1:6
err=pebble: unsupported reverse prefix iteration
err=pebble: unsupported reverse prefix iteration
# Verify the upper bound is respected in switchToMaxHeap() when the
# heap is not empty.
define
L
c.SET.9 f.SET.6
c.SET.9:9 d.SET.8:8 e.SET.7:7 f.SET.6:6
L
a.SET.5 d.SET.2
a.SET.5:5 b.SET.4:4 c.SET.3:3 d.SET.2:2
----
1:
000013:[c#9,SET-f#6,SET]
2:
000014:[a#5,SET-d#2,SET]
iter
set-bounds upper=d
seek-lt d
next
next
prev
prev
----
c#3,1:3
.
.
c#3,1:3
c#9,1:9
# Verify that the tombstone for the current level is updated correctly
# when we advance the iterator on the level and step into a new
# sstable. In the scenario below, the keys "c" and "d" should not show
# up in the iteration output.
define
L
a.SET.2 a.SET.2
a.SET.2:2
c.RANGEDEL.4 e.RANGEDEL.72057594037927935
c.RANGEDEL.4:e
f.SET.3 f.SET.3
f.SET.3:3
L
a.SET.0 f.SET.0
a.SET.0:1 b.SET.0:1 c.SET.0:1 d.SET.0:1 e.SET.0:1 f.SET.0:1
----
1:
000015:[a#2,SET-a#2,SET]
000016:[c#4,RANGEDEL-e#inf,RANGEDEL]
000017:[f#3,SET-f#3,SET]
2:
000018:[a#0,SET-f#0,SET]
iter
first
next
next
next
next
next
next
next
----
a#2,1:2
a#0,1:1
b#0,1:1
e#0,1:1
f#3,1:3
f#0,1:1
.
.
iter
last
prev
prev
prev
prev
prev
prev
prev
----
f#0,1:1
f#3,1:3
e#0,1:1
b#0,1:1
a#0,1:1
a#2,1:2
.
.
# Verify the upper bound is respected when switching directions at a RANGEDEL
# boundary.
define
L
kq.RANGEDEL.100 p.RANGEDEL.72057594037927935
kq.RANGEDEL.100:p
L
b.SET.90 o.SET.65
b.SET.90:90 cat.SET.70:70 g.SET.80:80 o.SET.65:65
L
a.SET.41 z.RANGEDEL.72057594037927935
a.SET.41:41 koujdlp.MERGE.37:37 ok.SET.46:46 v.SET.43:43 v.RANGEDEL.19:z
----
1:
000019:[kq#100,RANGEDEL-p#inf,RANGEDEL]
2:
000020:[b#90,SET-o#65,SET]
3:
000021:[a#41,SET-z#inf,RANGEDEL]
iter
set-bounds upper=n
seek-ge krgywquurww
prev
----
.
koujdlp#37,2:37
# Verify the lower bound is respected when switching directions at a RANGEDEL
# boundary.
define
L
a.SET.103 jyk.RANGEDEL.72057594037927935
a.SET.103:103 imd.SET.793:793 iwoeionch.SET.792:792 c.RANGEDEL.101:jyk
L
b.SET.90 o.SET.65
b.SET.90:90 cat.SET.70:70 g.SET.80:80 o.SET.65:65
L
all.SET.0 zk.SET.722
all.SET.0:0 c.SET.0:0 zk.SET.722:722
----
1:
000022:[a#103,SET-jyk#inf,RANGEDEL]
2:
000023:[b#90,SET-o#65,SET]
3:
000024:[all#0,SET-zk#722,SET]
iter
set-bounds lower=cz upper=jd
seek-lt jd
next
----
iwoeionch#792,1:792
.
# Exercise the early stopping behavior for prefix iteration when encountering
# range deletion tombstones. Keys a, d are not deleted, while the rest are.
define
L
a.SET.10 d.SET.10
a.SET.10:a10 b.SET.10:b10 c.SET.10:c10 d.SET.10:d10 b.RANGEDEL.12:d
----
1:
000025:[a#10,SET-d#10,SET]
iter
first
next
next
----
a#10,1:a10
d#10,1:d10
.
# The seek to c finds d since iteration cannot stop at c as it matches the
# prefix, and when it steps to d, it finds d is not deleted. Note that
# mergingIter is an InternalIterator and does not need to guarantee prefix
# match -- that is job of the higher-level Iterator. So "seek-prefix-ge c" is
# allowed to return d.
iter
seek-prefix-ge a false
seek-prefix-ge aa true
seek-prefix-ge b true
seek-prefix-ge c true
seek-prefix-ge d true
----
a#10,1:a10
.
.
d#10,1:d10
d#10,1:d10
iter
seek-prefix-ge a false
next
seek-prefix-ge b false
seek-prefix-ge d true
next
----
a#10,1:a10
.
.
d#10,1:d10
.
# Create a sstable which has a range tombstone that covers 4 points in the
# same sstable. This tests the PointsCoveredByRangeTombstones and PointCount
# stats.
define
L
a.SET.30 g.RANGEDEL.72057594037927935
a.SET.30:30 a.RANGEDEL.20:g b.SET.19:19 c.SET.18:18 d.SET.17:17 e.SET.16:16 f.SET.21:21
----
1:
000026:[a#30,SET-g#inf,RANGEDEL]
iter
first
stats
reset-stats
stats
next
stats
next
stats
next
stats
----
a#30,1:30
{BlockBytes:97 BlockBytesInCache:0 BlockReadDuration:0s KeyBytes:1 ValueBytes:2 PointCount:1 PointsCoveredByRangeTombstones:0 SeparatedPointValue:{Count:0 ValueBytes:0 ValueBytesFetched:0}}
{BlockBytes:0 BlockBytesInCache:0 BlockReadDuration:0s KeyBytes:0 ValueBytes:0 PointCount:0 PointsCoveredByRangeTombstones:0 SeparatedPointValue:{Count:0 ValueBytes:0 ValueBytesFetched:0}}
f#21,1:21
{BlockBytes:0 BlockBytesInCache:0 BlockReadDuration:0s KeyBytes:5 ValueBytes:10 PointCount:5 PointsCoveredByRangeTombstones:4 SeparatedPointValue:{Count:0 ValueBytes:0 ValueBytesFetched:0}}
.
{BlockBytes:0 BlockBytesInCache:0 BlockReadDuration:0s KeyBytes:6 ValueBytes:10 PointCount:6 PointsCoveredByRangeTombstones:4 SeparatedPointValue:{Count:0 ValueBytes:0 ValueBytesFetched:0}}
.
{BlockBytes:0 BlockBytesInCache:0 BlockReadDuration:0s KeyBytes:6 ValueBytes:10 PointCount:6 PointsCoveredByRangeTombstones:4 SeparatedPointValue:{Count:0 ValueBytes:0 ValueBytesFetched:0}}