ceremonyclient/pebble/sstable/format.go
Cassandra Heart 2e2a1e4789
v1.2.0 (#31)
2024-01-03 01:31:42 -06:00

258 lines
11 KiB
Go

// Copyright 2022 The LevelDB-Go and Pebble Authors. All rights reserved. Use
// of this source code is governed by a BSD-style license that can be found in
// the LICENSE file.
package sstable
import (
"github.com/cockroachdb/errors"
"github.com/cockroachdb/pebble/internal/base"
)
// TableFormat specifies the format version for sstables. The legacy LevelDB
// format is format version 1.
type TableFormat uint32
// The available table formats, representing the tuple (magic number, version
// number). Note that these values are not (and should not) be serialized to
// disk. The ordering should follow the order the versions were introduced to
// Pebble (i.e. the history is linear).
const (
TableFormatUnspecified TableFormat = iota
TableFormatLevelDB
TableFormatRocksDBv2
TableFormatPebblev1 // Block properties.
TableFormatPebblev2 // Range keys.
TableFormatPebblev3 // Value blocks.
TableFormatPebblev4 // DELSIZED tombstones.
NumTableFormats
TableFormatMax = NumTableFormats - 1
)
// TableFormatPebblev4, in addition to DELSIZED, introduces the use of
// InternalKeyKindSSTableInternalObsoleteBit.
//
// 1. Motivation
//
// We have various related problems caused by Pebble snapshots:
//
// - P1: RANGEDELs that delete points in the same sstable, but the points
// happen to not get deleted during compactions because of an open snapshot.
// This causes very expensive iteration, that has been observed in
// production deployments
//
// - P2: When iterating over a foreign sstable (in disaggregated storage), we
// need to do (a) point collapsing to expose at most one point per user key,
// (b) apply RANGEDELs in the sstable to hide deleted points in the same
// sstable. This per-sstable point collapsing iteration needs to be very
// efficient (ideally as efficient from a CPU perspective as iteration over
// regular sstables) since foreign sstables can be very long-lived -- one of
// the goals of disaggregated storage is to scale compute and disk bandwidth
// resources as a function of the hot (from a write perspective) data and
// not the whole data, so we don't want to have to rewrite foreign sstables
// solely to improve read performance.
//
// The ideal solution for P2 would allow user-facing reads to utilize the
// existing SST iterators (with slight modifications) and with no loss of
// efficiency. And for P1 and P2 we would like to skip whole blocks of
// overwritten/deleted points. Even when we can't skip whole blocks, avoiding
// key comparisons at iteration time to discover what points are deleted is
// very desirable, since keys can be long.
//
// We observe that:
//
// - Reads:
// - All user-facing reads in CockroachDB use iterators over the DB, hence
// have a higher read seqnum than all sstables (there are some rare cases
// that can violate this, but those are not important from a performance
// optimization perspective).
//
// - Certain internal-facing reads in CockroachDB use snapshots, but the
// snapshots are shortlived enough that most L5 and L6 sstables will have
// all seqnums lower than the snapshot seqnum.
//
// - Writes:
// - We already do key comparisons between points when writing the sstable
// to ensure that the sstable invariant (monotonically increasing internal
// keys) is not violated. So we know which points share the same userkey,
// and thereby which points are obsolete because there is a more recent
// point in the same sstable.
//
// - The compactionIter knows which point id deleted by a RANGEDEL even if
// the point does need to be written because of a snapshot.
//
// So this known information can be encoded in the sstable at write time and
// utilized for optimized reading.
//
// 2. Solution
//
// We primarily scope the solution to the following point kinds: SET,
// SETWITHDEL, DEL, DELSIZED, SINGLEDEL. These are the ones marked locally
// obsolete, i.e., obsolete within the sstable, and we can guarantee that at
// most one point will be exposed per user key. MERGE keys create more
// complexity: MERGE followed by MERGE causes multiple keys to not be
// obsolete. Same applies for MERGE followed by SET/SETWITHDEL/DEL*. Note
// that:
//
// - For regular sst iteration, the obsolete marking is a performance
// optimization, and multiple keys for the same userkey can be handled by
// higher layers in the iterator tree (specifically pebble.Iterator).
//
// - For foreign sst iteration, we disallow MERGEs to be written to such
// shared ssts (details below).
//
// The key kinds are marked with an obsolete bit
// (InternalKeyKindSSTableInternalObsoleteBit) when the key-value pair is
// obsolete. This marking is done within blockWriter, based on information
// passed to it by Writer. In turn, Writer uses a combination of key
// comparisons, and information provided by compactionIter to decide whether a
// key-value pair is obsolete. Additionally, a Pebble-internal
// BlockPropertyCollector (obsoleteKeyBlockPropertyCollector) is used to mark
// blocks where all key-value pairs are obsolete. Since the common case is
// non-obsolete blocks, this block property collector uses the empty byte
// slice to represent a non-obsolete block, which consumes no space in
// BlockHandleWithProperties.Props.
//
// At read time, the obsolete bit is only visible to the blockIter, which can
// be optionally configured to hide obsolete points. This hiding is only
// configured for data block iterators for sstables being read by user-facing
// iterators at a seqnum greater than the max seqnum in the sstable.
// Additionally, when this hiding is configured, a Pebble-internal block
// property filter (obsoleteKeyBlockPropertyFilter), is used to skip whole
// blocks that are obsolete.
//
// 2.1 Correctness
//
// Due to the level invariant, the sequence of seqnums for a user key in a
// sstable represents a contiguous subsequence of the seqnums for the userkey
// across the whole LSM, and is more recent than the seqnums in a sstable in a
// lower level. So exposing exactly one point from a sstable for a userkey
// will also mask the points for the userkey in lower levels. If we expose no
// point, because of RANGEDELs, that RANGEDEL will also mask the points in
// lower levels.
//
// Note that we do not need to do anything special at write time for
// SETWITHDEL and SINGLEDEL. This is because these key kinds are treated
// specially only by compactions, which do not hide obsolete points. For
// regular reads, SETWITHDEL behaves the same as SET and SINGLEDEL behaves the
// same as DEL.
//
// 2.2 Strictness and MERGE
//
// Setting the obsolete bit on point keys is advanced usage, so we support two
// modes, both of which must be truthful when setting the obsolete bit, but
// vary in when they don't set the obsolete bit.
//
// - Non-strict: In this mode, the bit does not need to be set for keys that
// are obsolete. Additionally, any sstable containing MERGE keys can only
// use this mode. An iterator over such an sstable, when configured to
// hideObsoletePoints, can expose multiple internal keys per user key, and
// can expose keys that are deleted by rangedels in the same sstable. This
// is the mode that non-advanced users should use. Pebble without
// disaggregated storage will also use this mode and will best-effort set
// the obsolete bit, to optimize iteration when snapshots have retained many
// obsolete keys.
//
// - Strict: In this mode, every obsolete key must have the obsolete bit set,
// and no MERGE keys are permitted. An iterator over such an sstable, when
// configured to hideObsoletePoints satisfies two properties:
// - S1: will expose at most one internal key per user key, which is the
// most recent one.
// - S2: will never expose keys that are deleted by rangedels in the same
// sstable.
//
// This is the mode for two use cases in disaggregated storage (which will
// exclude parts of the key space that has MERGEs), for levels that contain
// sstables that can become foreign sstables:
// - Pebble compaction output to these levels that can become foreign
// sstables.
//
// - CockroachDB ingest operations that can ingest into the levels that can
// become foreign sstables. Note, these are not sstables corresponding to
// copied data for CockroachDB range snapshots. This case occurs for
// operations like index backfills: these trivially satisfy the strictness
// criteria since they only write one key per userkey.
//
// TODO(sumeer): this latter case is not currently supported, since only
// Writer.AddWithForceObsolete calls are permitted for writing strict
// obsolete sstables. This is done to reduce the likelihood of bugs. One
// simple way to lift this limitation would be to disallow adding any
// RANGEDELs when a Pebble-external writer is trying to construct a strict
// obsolete sstable.
// ParseTableFormat parses the given magic bytes and version into its
// corresponding internal TableFormat.
func ParseTableFormat(magic []byte, version uint32) (TableFormat, error) {
switch string(magic) {
case levelDBMagic:
return TableFormatLevelDB, nil
case rocksDBMagic:
if version != rocksDBFormatVersion2 {
return TableFormatUnspecified, base.CorruptionErrorf(
"pebble/table: unsupported rocksdb format version %d", errors.Safe(version),
)
}
return TableFormatRocksDBv2, nil
case pebbleDBMagic:
switch version {
case 1:
return TableFormatPebblev1, nil
case 2:
return TableFormatPebblev2, nil
case 3:
return TableFormatPebblev3, nil
case 4:
return TableFormatPebblev4, nil
default:
return TableFormatUnspecified, base.CorruptionErrorf(
"pebble/table: unsupported pebble format version %d", errors.Safe(version),
)
}
default:
return TableFormatUnspecified, base.CorruptionErrorf(
"pebble/table: invalid table (bad magic number: 0x%x)", magic,
)
}
}
// AsTuple returns the TableFormat's (Magic String, Version) tuple.
func (f TableFormat) AsTuple() (string, uint32) {
switch f {
case TableFormatLevelDB:
return levelDBMagic, 0
case TableFormatRocksDBv2:
return rocksDBMagic, 2
case TableFormatPebblev1:
return pebbleDBMagic, 1
case TableFormatPebblev2:
return pebbleDBMagic, 2
case TableFormatPebblev3:
return pebbleDBMagic, 3
case TableFormatPebblev4:
return pebbleDBMagic, 4
default:
panic("sstable: unknown table format version tuple")
}
}
// String returns the TableFormat (Magic String,Version) tuple.
func (f TableFormat) String() string {
switch f {
case TableFormatLevelDB:
return "(LevelDB)"
case TableFormatRocksDBv2:
return "(RocksDB,v2)"
case TableFormatPebblev1:
return "(Pebble,v1)"
case TableFormatPebblev2:
return "(Pebble,v2)"
case TableFormatPebblev3:
return "(Pebble,v3)"
case TableFormatPebblev4:
return "(Pebble,v4)"
default:
panic("sstable: unknown table format version tuple")
}
}