更新 0g.sh

0g.sh

@@ -59,7 +59,7 @@ function install_node() {
 
     # 更新和安装必要的软件
     sudo apt update && sudo apt upgrade -y
-    sudo apt install curl git wget htop tmux build-essential jq make lz4 gcc unzip liblz4-tool -y
+    sudo apt install git wget build-essential jq make lz4 gcc liblz4-tool -y
 
     # 安装 Go
     if ! check_go_installation; then
@@ -79,30 +79,31 @@ function install_node() {
     export MONIKER="My_Node"
     export WALLET_NAME="wallet"
 
-    # 获取初始文件和地址簿
+    # 初始化节点
     cd $HOME
     0gchaind init $MONIKER --chain-id zgtendermint_16600-2
     0gchaind config chain-id zgtendermint_16600-2
     0gchaind config node tcp://localhost:13457
 
-    # 配置节点
+    # 配置创世文件
     rm ~/.0gchain/config/genesis.json
     wget -P ~/.0gchain/config https://github.com/0glabs/0g-chain/releases/download/v0.2.3/genesis.json
     0gchaind validate-genesis
 
     # 配置节点
-    SEEDS=""
+    SEEDS="8f21742ea5487da6e0697ba7d7b36961d3599567@og-testnet-seed.itrocket.net:47656"
     PEERS="4d98cf3cb2a61238a0b1557596cdc4b306472cb9@95.216.228.91:13456,c44baa3836d07f9ed9a832f819bcf19fda67cc5d@95.216.42.217:13456,81987895a11f6689ada254c6b57932ab7ed909b6@54.241.167.190:26656,010fb4de28667725a4fef26cdc7f9452cc34b16d@54.176.175.48:26656,e9b4bc203197b62cc7e6a80a64742e752f4210d5@54.193.250.204:26656,68b9145889e7576b652ca68d985826abd46ad660@18.166.164.232:26656"
     sed -i "s/persistent_peers = \"\"/persistent_peers = \"$PEERS\"/" $HOME/.0gchain/config/config.toml
     sed -i "s/seeds = \"\"/seeds = \"$SEEDS\"/" $HOME/.0gchain/config/config.toml
+    sed -i -e 's/max_num_inbound_peers = 40/max_num_inbound_peers = 100/' -e 's/max_num_outbound_peers = 10/max_num_outbound_peers = 100/' $HOME/.0gchain/config/config.toml
+    wget -O $HOME/.0gchain/config/addrbook.json https://testnet-files.itrocket.net/og/addrbook.json
+
 
     # 配置裁剪
     sed -i -e "s/^pruning *=.*/pruning = \"custom\"/" $HOME/.0gchain/config/app.toml
-    sed -i -e "s/^pex *=.*/pex = \"true\"/" $HOME/.0gchain/config/config.toml
     sed -i -e "s/^pruning-keep-recent *=.*/pruning-keep-recent = \"100\"/" $HOME/.0gchain/config/app.toml
     sed -i -e "s/^pruning-keep-every *=.*/pruning-keep-every = \"0\"/" $HOME/.0gchain/config/app.toml
     sed -i -e "s/^pruning-interval *=.*/pruning-interval = \"10\"/" $HOME/.0gchain/config/app.toml
-    sed -i -e 's/max_num_inbound_peers = 40/max_num_inbound_peers = 100/' -e 's/max_num_outbound_peers = 10/max_num_outbound_peers = 100/' $HOME/.0gchain/config/config.toml
 
     # 配置端口
     sed -i -e "s%^proxy_app = \"tcp://127.0.0.1:26658\"%proxy_app = \"tcp://127.0.0.1:13458\"%; s%^laddr = \"tcp://127.0.0.1:26657\"%laddr = \"tcp://127.0.0.1:13457\"%; s%^pprof_laddr = \"localhost:6060\"%pprof_laddr = \"localhost:13460\"%; s%^laddr = \"tcp://0.0.0.0:26656\"%laddr = \"tcp://0.0.0.0:13456\"%; s%^prometheus_listen_addr = \":26660\"%prometheus_listen_addr = \":13466\"%" $HOME/.0gchain/config/config.toml
@@ -118,12 +119,12 @@ function install_node() {
 
 }
 
-# 查看0gai 服务状态
+# 查看 PM2 服务状态
 function check_service_status() {
     pm2 list
 }
 
-# 0gai 节点日志查询
+# 验证节点日志查询
 function view_logs() {
     pm2 logs 0gchaind
 }
@@ -160,6 +161,7 @@ function import_wallet() {
 
 # 查询余额
 function check_balances() {
+    echo "请确认同步到最新区块之后再查询余额"
     read -p "请输入钱包地址: " wallet_address
     0gchaind query bank balances "$wallet_address"
 }
@@ -209,32 +211,37 @@ function install_storage_node() {
 
 
 # 克隆仓库
-git clone -b v0.3.3 https://github.com/0glabs/0g-storage-node.git
+git clone -b v0.3.4 https://github.com/0glabs/0g-storage-node.git
 
 # 进入对应目录构建
 cd 0g-storage-node
 git submodule update --init
 
 # 构建代码
+echo "准备构建，该步骤消耗一段时间。请保持 SSH 不要断开。看到 Finish 字样为构建完成。"
 cargo build --release
 
-#后台运行
+# 编辑配置
-cd run
+
+read -p "请输入你想导入的EVM钱包私钥，不要有0x: " miner_key
+read -p "请输入设备 IP 地址（本地机器请直接回车跳过）: " public_address
+read -p "请输入使用的 JSON-RPC : " json_rpc
+sed -i '
+s|# network_enr_address = ""|network_enr_address = "'$public_address'"|
+s|# rpc_listen_address = ".*"|rpc_listen_address = "0.0.0.0:5678"|
+s|# network_boot_nodes = \[\]|network_boot_nodes = \[\"/ip4/54.219.26.22/udp/1234/p2p/16Uiu2HAmTVDGNhkHD98zDnJxQWu3i1FL1aFYeh9wiQTNu4pDCgps\",\"/ip4/52.52.127.117/udp/1234/p2p/16Uiu2HAkzRjxK2gorngB1Xq84qDrT4hSVznYDHj6BkbaE4SGx9oS\",\"/ip4/18.167.69.68/udp/1234/p2p/16Uiu2HAm2k6ua2mGgvZ8rTMV8GhpW71aVzkQWy7D37TTDuLCpgmX\"\]|
+s|# log_contract_address = ""|log_contract_address = "0x8873cc79c5b3b5666535C825205C9a128B1D75F1"|
+s|# mine_contract_address = ""|mine_contract_address = "0x85F6722319538A805ED5733c5F4882d96F1C7384"|
+s|# blockchain_rpc_endpoint = ".*"|blockchain_rpc_endpoint = "'$json_rpc'"|
+s|# log_sync_start_block_number = 0|log_sync_start_block_number = 802|
+s|# miner_key = ""|miner_key = "'$miner_key'"|
+' $HOME/0g-storage-node/run/config.toml
+
+# 启动
+screen -dmS zgs_node_session $HOME/0g-storage-node/target/release/zgs_node --config $HOME/0g-storage-node/run/config.toml
 
 
-read -p "请输入你想导入的EVM钱包私钥，不要有0x: " minerkey
+echo '====================== 安装完成，使用 screen -ls 命令查询即可 ==========================='
-read -p "请输入设备IP地址: " new_address
-
-sed -i "s/miner_key = \"\"/miner_key = \"$minerkey\"/" config.toml
-sed -i "s/log_contract_address = \"\"/log_contract_address = \"0x8873cc79c5b3b5666535C825205C9a128B1D75F1\"/" config.toml
-sed -i "s/mine_contract_address = \"\"/mine_contract_address = \"0x85F6722319538A805ED5733c5F4882d96F1C7384\"/" config.toml
-sed -i "s|^# *network_enr_address = \".*\"|network_enr_address = \"$new_address\"|" config.toml
-sed -i 's/log_sync_start_block_number = [0-9]*/log_sync_start_block_number = 180000/' config.toml
-
-screen -dmS zgs_node_session ../target/release/zgs_node --config config.toml
-
-echo '====================== 安装完成，使用screen命令查询即可 ==========================='
-
 
 }
 
@@ -290,18 +297,64 @@ read -p "请输入钱包名称: " wallet_name
 
 }
 
-# 查看存储节点同步状态
+# 查看存储节点日志
 function check_storage_status() {
     tail -f "$(find ~/0g-storage-node/run/log/ -type f -printf '%T+ %p\n' | sort -r | head -n 1 | cut -d' ' -f2-)"
 }
 
-# 查看存储节点同步状态
+# 重启存储节点
-function start_storage() {
+function restart_storage() {
-cd 0g-storage-node/run && screen -dmS zgs_node_session ../target/release/zgs_node --config config.toml
+    # 退出现有进程
+    screen -S zgs_node_session -X quit
+    # 启动
+    screen -dmS zgs_node_session $HOME/0g-storage-node/target/release/zgs_node --config $HOME/0g-storage-node/run/config.toml
     echo '====================== 启动成功，请通过screen -r zgs_node_session 查询 ==========================='
 
 }
 
+# 修改日志等级
+function change_storage_log_level() {
+    echo "DEBUG(1) > INFO(2) > WARN(3) > ERROR(4)"
+    echo "DEBUG 等级日志文件最大，ERROR 等级日志文件最小"
+    read -p "请选择日志等级(1-4): " level
+    case "$level" in
+        1)
+            echo "debug,hyper=info,h2=info" > $HOME/0g-storage-node/run/log_config ;;
+        2)
+            echo "info,hyper=info,h2=info" > $HOME/0g-storage-node/run/log_config ;;
+        3)
+            echo "warn,hyper=info,h2=info" > $HOME/0g-storage-node/run/log_config ;;
+        4)
+            echo "error,hyper=info,h2=info" > $HOME/0g-storage-node/run/log_config ;;
+    esac
+    echo "修改完成，请重新启动存储节点"
+}
+
+
+# 统计日志文件大小
+function storage_logs_disk_usage(){
+    du -sh ~/0g-storage-node/run/log/
+    du -sh ~/0g-storage-node/run/log/*
+}
+
+
+# 删除存储节点日志
+function delete_storage_logs(){
+    echo "确定删除存储节点日志？[Y/N]"
+    read -r -p "请确认: " response
+        case "$response" in
+        [yY][eE][sS]|[yY])
+            rm -r ~/0g-storage-node/run/log/*
+            echo "删除完成，请重启存储节点"
+            ;;
+        *)
+            echo "取消操作"
+            ;;
+    esac
+
+}
+
+
 # 转换 ETH 地址
 function transfer_EIP() {
 read -p "请输入你的钱包名称: " wallet_name
@@ -309,23 +362,6 @@ echo "0x$(0gchaind debug addr $(0gchaind keys show $wallet_name -a) | grep hex |
 
 }
 
-# 卸载节点功能
-function uninstall_old_node() {
-    echo "你确定要卸载0g ai 节点程序吗？这将会删除所有相关的数据。[Y/N]"
-    read -r -p "请确认: " response
-
-    case "$response" in
-        [yY][eE][sS]|[yY]) 
-            echo "开始卸载节点程序..."
-            pm2 stop 0gchaind && pm2 delete 0gchaind
-            rm -rf $HOME/.0gchain $HOME/0gchain $(which 0gchaind) && rm -rf 0gchaind
-            echo "节点程序卸载完成。"
-            ;;
-        *)
-            echo "取消卸载操作。"
-            ;;
-    esac
-}
 
 # 导出验证者key
 function export_priv_validator_key() {
@@ -351,10 +387,21 @@ function uninstall_storage_node() {
 }
 
 function update_script() {
+    SCRIPT_PATH="./0g.sh"  # 定义脚本路径
     SCRIPT_URL="https://raw.githubusercontent.com/a3165458/0g.ai/main/0g.sh"
-    curl -o $SCRIPT_PATH $SCRIPT_URL
+
+    # 备份原始脚本
+    cp $SCRIPT_PATH "${SCRIPT_PATH}.bak"
+
+    # 下载新脚本并检查是否成功
+    if curl -o $SCRIPT_PATH $SCRIPT_URL; then
         chmod +x $SCRIPT_PATH
         echo "脚本已更新。请退出脚本后，执行bash 0g.sh 重新运行此脚本。"
+    else
+        echo "更新失败。正在恢复原始脚本。"
+        mv "${SCRIPT_PATH}.bak" $SCRIPT_PATH
+    fi
+
 }
 
 # 主菜单
@@ -375,22 +422,23 @@ function main_menu() {
         echo "5. 查看节点同步状态"
         echo "6. 查看当前服务状态"
         echo "7. 运行日志查询"
+        echo "8. 卸载0gchain验证者节点"
         echo "9. 创建验证者"
         echo "10. 给自己验证者地址质押代币"
         echo "11. 转换ETH地址"
         echo "=======================存储节点功能================================"
         echo "12. 创建存储节点"
         echo "13. 查看存储节点日志"
-        echo "14. 单独启动存储节点代码，适用于需要修改存储路径等功能修改过后使用"
+        echo "14. 重启存储节点"
-        echo "17. 卸载存储节点(卸载前请先停止对应的存储节点进程)"
+        echo "15. 卸载存储节点"
-        echo "=======================卸载evmos测试网节点功能================================"
+        echo "18. 修改日志等级"
-        echo "8. 卸载0gchain验证者节点"
+        echo "19. 统计日志文件大小"
-        echo "15. 卸载旧evmos验证者节点"  
+        echo "20. 删除存储节点日志"
         echo "=======================备份功能================================"
         echo "16. 备份验证者私钥"
         echo "======================================================="
-        echo "18. 更新本脚本"  
+        echo "17. 更新本脚本"
-        read -p "请输入选项（1-18）: " OPTION
+        read -p "请输入选项（1-20）: " OPTION
 
         case $OPTION in
         1) install_node ;;
@@ -406,11 +454,13 @@ function main_menu() {
         11) transfer_EIP ;;
         12) install_storage_node ;;
         13) check_storage_status ;;
-        14) start_storage ;;
+        14) restart_storage ;;
-        15) uninstall_old_node ;;
+        15) uninstall_storage_node ;;
         16) export_priv_validator_key ;;
-        17) uninstall_storage_node ;;
+        17) update_script ;;
-        18) update_script ;;
+        18) change_storage_log_level ;;
+        19) storage_logs_disk_usage ;;
+        20) delete_storage_logs ;;
         *) echo "无效选项。" ;;
         esac
         echo "按任意键返回主菜单..."