0g-chain/.github/scripts/seed-protonet.sh

#!/bin/bash
set -ex

# configure kava binary to talk to the desired chain endpoint
kava config node "${CHAIN_API_URL}"
kava config chain-id "${CHAIN_ID}"

# use the test keyring to allow scriptng key generation
kava config keyring-backend test

# wait for transactions to be committed per CLI command
kava config broadcast-mode block

# setup dev wallet
echo "${DEV_WALLET_MNEMONIC}" | kava keys add --recover dev-wallet
DEV_TEST_WALLET_ADDRESS="0x7E08fa61f22f1A40B4617b887eD24b85CDaf33c2"
WEBAPP_E2E_WHALE_ADDRESS="0x0252284098b19036F81bd22851f8699042fafac2"

# setup kava ethereum compatible account for deploying
# erc20 contracts to the kava chain
echo "sweet ocean blush coil mobile ten floor sample nuclear power legend where place swamp young marble grit observe enforce lake blossom lesson upon plug" | kava keys add --recover --eth dev-erc20-deployer-wallet

# fund evm-contract-deployer account (using issuance)
kava tx issuance issue 200000000ukava kava1van3znl6597xgwwh46jgquutnqkwvwszjg04fz --from dev-wallet --gas-prices 0.5ukava -y

# deploy and fund USDC ERC20 contract
MULTICHAIN_USDC_CONTRACT_DEPLOY=$(npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" deploy-erc20 "USD Coin" USDC 6)
MULTICHAIN_USDC_CONTRACT_ADDRESS=${MULTICHAIN_USDC_CONTRACT_DEPLOY: -42}
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$MULTICHAIN_USDC_CONTRACT_ADDRESS" 0x6767114FFAA17C6439D7AEA480738B982CE63A02 1000000000000

# # deploy and fund wKava ERC20 contract
wKAVA_CONTRACT_DEPLOY=$(npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" deploy-erc20 "Wrapped Kava" wKava 6)
wKAVA_CONTRACT_ADDRESS=${wKAVA_CONTRACT_DEPLOY: -42}
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$wKAVA_CONTRACT_ADDRESS" 0x6767114FFAA17C6439D7AEA480738B982CE63A02 1000000000000

# deploy and fund BNB contract
BNB_CONTRACT_DEPLOY=$(npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" deploy-erc20 "Binance" BNB 8)
BNB_CONTRACT_ADDRESS=${BNB_CONTRACT_DEPLOY: -42}
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$BNB_CONTRACT_ADDRESS" 0x6767114FFAA17C6439D7AEA480738B982CE63A02 1000000000000

# deploy and fund USDT contract
MULTICHAIN_USDT_CONTRACT_DEPLOY=$(npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" deploy-erc20 "USDT" USDT 6)
MULTICHAIN_USDT_CONTRACT_ADDRESS=${MULTICHAIN_USDT_CONTRACT_DEPLOY: -42}
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$MULTICHAIN_USDT_CONTRACT_ADDRESS" 0x6767114FFAA17C6439D7AEA480738B982CE63A02 1000000000000

# deploy and fund DAI contract
DAI_CONTRACT_DEPLOY=$(npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" deploy-erc20 "DAI" DAI 18)
DAI_CONTRACT_ADDRESS=${DAI_CONTRACT_DEPLOY: -42}
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$DAI_CONTRACT_ADDRESS" 0x6767114FFAA17C6439D7AEA480738B982CE63A02 1000000000000

# deploy and fund wBTC ERC20 contract
wBTC_CONTRACT_DEPLOY=$(npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" deploy-erc20 "Wrapped BTC" BTC 8)
wBTC_CONTRACT_ADDRESS=${wBTC_CONTRACT_DEPLOY: -42}
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$wBTC_CONTRACT_ADDRESS" 0x6767114FFAA17C6439D7AEA480738B982CE63A02 100000000000000

# deploy and fund wETH ERC20 contract
wETH_CONTRACT_DEPLOY=$(npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" deploy-erc20 "Wrapped wETH" ETH 18)
wETH_CONTRACT_ADDRESS=${wETH_CONTRACT_DEPLOY: -42}
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$wETH_CONTRACT_ADDRESS" 0x6767114FFAA17C6439D7AEA480738B982CE63A02 1000000000000000000000

# deploy and fund axlUSDC ERC20 contract
AXL_USDC_CONTRACT_DEPLOY=$(npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" deploy-erc20 "USD Coin" USDC 6)
AXL_USD_CONTRACT_ADDRESS=${AXL_USDC_CONTRACT_DEPLOY: -42}
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$AXL_USD_CONTRACT_ADDRESS" 0x6767114FFAA17C6439D7AEA480738B982CE63A02 1000000000000

# seed some evm wallets
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$wBTC_CONTRACT_ADDRESS" "$DEV_TEST_WALLET_ADDRESS" 10000000000000
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$MULTICHAIN_USDC_CONTRACT_ADDRESS" "$DEV_TEST_WALLET_ADDRESS" 100000000000
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$wETH_CONTRACT_ADDRESS" "$DEV_TEST_WALLET_ADDRESS" 1000000000000000000000
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$AXL_USD_CONTRACT_ADDRESS" "$DEV_TEST_WALLET_ADDRESS" 100000000000

# seed webapp E2E whale account
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$wBTC_CONTRACT_ADDRESS" "$WEBAPP_E2E_WHALE_ADDRESS" 100000000000000
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$MULTICHAIN_USDC_CONTRACT_ADDRESS" "$WEBAPP_E2E_WHALE_ADDRESS" 1000000000000
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$wETH_CONTRACT_ADDRESS" "$WEBAPP_E2E_WHALE_ADDRESS" 10000000000000000000000
npx hardhat --network "${ERC20_DEPLOYER_NETWORK_NAME}" mint-erc20 "$AXL_USD_CONTRACT_ADDRESS" "$WEBAPP_E2E_WHALE_ADDRESS" 10000000000000

# give dev-wallet enough delegation power to pass proposals by itself

# issue kava to dev wallet for delegating to each validator
kava tx issuance issue 6000000000ukava kava1vlpsrmdyuywvaqrv7rx6xga224sqfwz3fyfhwq \
  --from dev-wallet --gas-prices 0.5ukava -y

# parse space seperated list of validators
# into bash array
read -r -a GENESIS_VALIDATOR_ADDRESS_ARRAY <<< "$GENESIS_VALIDATOR_ADDRESSES"

# delegate 300KAVA to each validator
for validator in "${GENESIS_VALIDATOR_ADDRESS_ARRAY[@]}"
do
  kava tx staking delegate "${validator}" 300000000ukava --from dev-wallet --gas-prices 0.5ukava -y
done

# create a text proposal
kava tx gov submit-legacy-proposal --deposit 1000000000ukava --type "Text" --title "Example Proposal" --description "This is an example proposal" --gas auto --gas-adjustment 1.2 --from dev-wallet --gas-prices 0.01ukava -y

# setup god's wallet
echo "${KAVA_TESTNET_GOD_MNEMONIC}" | kava keys add --recover god

# create template string for the proposal we want to enact
# https://kava-labs.atlassian.net/wiki/spaces/ENG/pages/1228537857/Submitting+Governance+Proposals+WIP
PARAM_CHANGE_PROP_TEMPLATE=$(cat <<'END_HEREDOC'
{
    "@type": "/cosmos.params.v1beta1.ParameterChangeProposal",
    "title": "Set Initial ERC-20 Contracts",
    "description": "Set Initial ERC-20 Contracts",
    "changes": [
        {
            "subspace": "evmutil",
            "key": "EnabledConversionPairs",
            "value": "[{\"kava_erc20_address\":\"MULTICHAIN_USDC_CONTRACT_ADDRESS\",\"denom\":\"erc20/multichain/usdc\"},{\"kava_erc20_address\":\"MULTICHAIN_USDT_CONTRACT_ADDRESS\",\"denom\":\"erc20/multichain/usdt\"},{\"kava_erc20_address\":\"MULTICHAIN_wBTC_CONTRACT_ADDRESS\",\"denom\":\"erc20/multichain/btc\"},{\"kava_erc20_address\":\"AXL_USDC_CONTRACT_ADDRESS\",\"denom\":\"erc20/axelar/usdc\"},{\"kava_erc20_address\":\"wBTC_CONTRACT_ADDRESS\",\"denom\":\"erc20/axelar/btc\"},{\"kava_erc20_address\":\"wETH_CONTRACT_ADDRESS\",\"denom\":\"erc20/axelar/eth\"}]"
        }
    ]
}
END_HEREDOC
)

# substitute freshly deployed contract addresses
finalProposal=$PARAM_CHANGE_PROP_TEMPLATE

finalProposal="${finalProposal/MULTICHAIN_USDC_CONTRACT_ADDRESS/$MULTICHAIN_USDC_CONTRACT_ADDRESS}"
finalProposal="${finalProposal/MULTICHAIN_USDT_CONTRACT_ADDRESS/$MULTICHAIN_USDT_CONTRACT_ADDRESS}"
finalProposal="${finalProposal/MULTICHAIN_wBTC_CONTRACT_ADDRESS/$MULTICHAIN_wBTC_CONTRACT_ADDRESS}"
finalProposal="${finalProposal/AXL_USDC_CONTRACT_ADDRESS/$AXL_USDC_CONTRACT_ADDRESS}"
finalProposal="${finalProposal/wBTC_CONTRACT_ADDRESS/$wBTC_CONTRACT_ADDRESS}"
finalProposal="${finalProposal/wETH_CONTRACT_ADDRESS/$wETH_CONTRACT_ADDRESS}"

# create unique proposal filename
proposalFileName="$(date +%s)-proposal.json"
touch $proposalFileName

# save proposal as file to disk
echo "$finalProposal" > $proposalFileName

# snapshot original module params
originalEvmUtilParams=$(curl https://api.app.internal.testnet.us-east.production.kava.io/kava/evmutil/v1beta1/params)
printf "original evm util module params\n %s" , "$originalEvmUtilParams"

# change the params of the chain like a god - make it so 🖖🏽
# make sure to update god committee member permissions for the module
# and params being updated (see below for example)
# https://github.com/Kava-Labs/kava/pull/1556/files#diff-0bd6043650c708661f37bbe6fa5b29b52149e0ec0069103c3954168fc9f12612R900-R903
kava tx committee submit-proposal 1 "$proposalFileName" --gas 2000000 --gas-prices 0.01ukava --from god -y

# fetch current module params
updatedEvmUtilParams=$(curl https://api.app.internal.testnet.us-east.production.kava.io/kava/evmutil/v1beta1/params)
printf "updated evm util module params\n %s" , "$updatedEvmUtilParams"